9/03/2014 02:53:00 am
Sarkari Job
I just thought of documenting my successful configuration data for D-Link DSL-2520U modem on BSNL broadband line.
In my setup I have connected the modem with DSL line and Ethernet cable with WAN port of Wireless router. I was able to access the modem configuration page through URL: http://192.168.1.1. Here I have dumped the configuration used by modem once it is successfully configured.
At the end of this post, you can find my configuration file, which you can upload with your userid and password as an attempt to get your job quickly.
Configuration
Advanced Setup -> WAN -> Edit (if already a record is there) or Add
ATM PVC Configuration:
VPI: 0 and PCI: 35
Service Category: UBR without PCR
Connection type: PPPoE
Encapsulation mode: LLC/SNAP-BRIDGING
PPP Username and password: Enter userid and password provided by BSNL. You can call BSNL to get your user id and password.
PPPoE service name: It can be anything like “dataone”
Authentication method: AUTO
MTU: 1492
Network Address Translation Settings:
Enable NAT – Tick
Enable Firewall – Tick
Enable IGMP Multicast, and WAN service
Enable WAN Service – Tick
Service Name: pppoe_0_0_35_1
Once configured, your device info should be some thing like below.
Device Info – Summary
Board ID: DSL-2520U Software Version: IM_1.00 Software Date: Jun 11 2010 Bootloader (CFE) Version: before 1.0.37-5.12 This information reflects the current status of your DSL connection.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Here is Diagnostic Report:
pppoe_0_0_35_1 DiagnosticsYour modem is capable of testing your DSL connection. The individual tests are listed below. If a test displays a fail status, click “Rerun Diagnostic Tests” at the bottom of this page to make sure the fail status is consistent.Test the connection to your local network
Test your ENET Connection: PASS Test your USB Connection: DOWN - This is fine since I use Ethernet only Test the connection to your DSL service provider
Test ADSL Synchronization: PASS Test ATM OAM F5 segment ping: PASS Test ATM OAM F5 end-to-end ping: PASS Test the connection to your Internet service provider
|
|
|
|
|
|
|
|
|
|
If you don’t get your Modem up even after following the above steps, you can try my configutation file mentioned in next section.
Configuration file to make your life easier:
Here is my settings backup file, which can be used later to restore the configuration. The backup can be taken by Management -> Settings -> Backup.
BSNL DSL-2520U Modem Configuration File (2.6 KiB, 4,520 hits)
You may try downloading this file and edit the file for following line with your own userid and password.
userName=”YOUR-USERID” password=”YOUR-PASSWORD”
Once edited you can upload this file to Modem through Management -> Settings -> Update. Once updated Save/Reboot.
All the best!
