All About IP -The first step in hacking...

All About IP -The first step in hacking...

In here I have figure out some very easy but cool ways to trace out the geographical location and various other infos like ISP details etc of a remote computer using its IP(Internet Protocol).

Well I guess its one of the most important must learn manual for boys out there if you want to impress your friends particularly gals whom you'll meet online in a chat room and tell them their geographical locations and ISP details and make them surprised and impressed .

In the practical execution of this manual you don't have to work much as it is very simple only you have to use your brain to understand some symbols and some format of expressions and use your IQ to execute things the right way.

What is IP and how to get the IP of a remote system::

Getting the IP or Internet Protocol of a remote system is the most important and the first step of hacking into it. Probably it is the first thing a hacker do to get info for researching on a system. Well IP is a unique number assigned to each computer on a network. It is this unique address which represents the system on the network. Generally the IP of a particular system changes each time you log on to the network by dialing to your ISP and it is assigned to you by your ISP. IP of a system which is always on the network remains generally the same. Generally those kind of systems are most likely to suffer a hacking attack because of its stable IP. Using IP you can even execute system commands on the victim's computer.

Lets take the example of the following IP address: 202.144.49.110 Now the first part, the numbers before the first decimal i.e. 209 is the Network number or the Network Prefix.. This means that it identifies the number of the network in which the host is. The second part i.e. 144 is the Host Number that is it identifies the number of the host within the Network. This means that in the same Network, the network number is same. In order to provide flexibility in the size of the Network, here are different classes of IP addresses:


Address Class Dotted Decimal Notation Ranges

Class A ( /8 Prefixes) 1.xxx.xxx.xxx through 126.xxx.xxx.xxx

Class B ( /16 Prefixes) 128.0.xxx.xxx through 191.255.xxx.xxx

Class C ( /24 Prefixes) 192.0.0.xxx through 223.255.255.xxx

The various classes will be clearer after reading the next few lines.

Each Class A Network Address contains a 8 bit Network Prefix followed by a 24-bit host number. They are considered to be primitive. They are referred to as "/8''s" or just "8's" as they have an 8-bit Network prefix.


In a Class B Network Address there is a 16 bit Network Prefix followed by a 16-bit Host number. It is referred to as "16's".

A class C Network address contains a 24-bit Network Prefix and a 8 bit Host number. It is referred to as

"24's" and is commonly used by most ISP's.

Due to the growing size of the Internet the Network Administrators faced many problems. The Internet routing tables were beginning to grow and now the administrators had to request another network number from the Internet before a new network could be installed at their site. This is where sub-netting came in.

Now if your ISP is a big one and if it provides you with dynamic IP addresses then you will most probably see that whenever you log on to the net, your IP address will have the same first 24 bits and only the last 8 bits will keep changing. This is due to the fact that when sub-netting comes in then the IP Addresses structure becomes:

xxx.xxx.zzz.yyy

where the first 2 parts are Network Prefix numbers and the zzz is the Subnet number and the yyy is the host number. So you are always connected to the same Subnet within the same Network. As a result the first 3 parts will remain the same and only the last part i.e. yyy is variable.

***********************

For Example, if say an ISP xyz is given the IP: 203.98.12.xx Network address then you can be awarded any IP, whose first three fields are 203.98.12. Get it?

So, basically this means that each ISP has a particular range in which to allocate all its subscribers. Or in other words, all subscribers or all people connected to the internet using the same ISP, will have to be in this range. This in effect would mean that all people using the same ISP are likely to have the same first three fields of their IP Addresses.

This means that if you have done a lot of (By this I really mean a lot) of research, then you could figure out which ISP a person is using by simply looking at his IP. The ISP name could then be used to figure out the city and the country of the person. Right? Let me take an example to stress as to how cumbersome but easy (once the research is done) the above method can be.

In my country, say there are three main ISPs:

ISP Name Network Address Allotted

ISP I 203.94.47.xx

ISP II 202.92.12.xx

ISP III 203.91.35.xx

Now, if I get to know the IP of an e-pal of mine, and it reads: 203.91.35.12, then I can pretty easily figure out that he uses ISP III to connect to the internet. Right? You might say that any idiot would be able to do this. Well, yes and no. You see, the above method of finding out the ISP of a person was successful only because we already had the ISP and Network Address Allotted list with us. So, what my point is, that the above method can be successful only after a lot of research and experimentation. And, I do think such research can be helpful sometimes.

Also, this would not work, if you take it all on in larger scale. What if the IP that you have belongs to someone living in a remote igloo in the North Pole? You could not possibly get the Network Addresses of all the ISPs in the world, could you? If yes please send it to me J.

Well now I guess you have pretty good knowledge about what an IP is and what you can do by knowing the IP of a remote system. Now lets come to the point of finding out the IP of remote system.

Well you can easily figure out the IP of a remote system using the netstat utility available in the microsoft's version of DOS. The netstat command shows the connections in which your system is engaged to and the ports they are using. Suppose you are checking your mail in hotmail and you want to find out the IP of msn. All you need to do is to open a dos window (command.com) and type netstat. You will see all the open connections of your system. There you will see something :

Proto Local Address Foreign Address State

TCP RAJ:1031 64.4.xx.xx:80 ESTABLISHED

Now you got the IP address of hotmail ass 64.4.xx.xx .

Similarly you can figure out the IP address of most http or ftp connections.

To know your own IP type the following command in a dos windows

C:\netstat -n

[this commands converts the IP name into IP addresses]

this is what you will probably see on typing the above command :

Proto Local Address Foreign Address State

TCP 203.xx.251.161:1031 194.1.129.227:21 ESTABLISHED

TCP 203.xx.251.161:1043 207.138.41.181:80 FIN_WAIT_2

TCP 203.xx.251.161:1053 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1058 194.1.129.227:20 TIME_WAIT

TCP 203.xx.251.161:1069 203.94.243.71:110 TIME_WAIT

TCP 203.xx.251.161:1071 194.98.93.244:80 ESTABLISHED

TCP 203.xx.251.161:1078 203.94.243.71:110 TIME_WAIT



Here 203.xx.251.161 is your IP address.

Now lets clarify the format used by netstat :

Proto : It shows the type of protocol the connection with the remote system is using.

Here TCP (transmission control protocol) is the protocol used by my system to connect to other systems.

Local Address :
It shows the local address ie the local IP. When the netstat command is executed without 'n' switch then the name of the local system is displayed and when the netstat is executed with 'n' switch then the IP of the local system is displayed. Here you can also find out the port used by the connection.

xxx.yyy.zzz.aaa:1024

in this format you will see the local address. Here 1024 is the port to which the remote system is connected in your system



Foreign Address ::
It shows the IP address of the remote system to which your system is connected. In this case also if the netstat command is excuted with 'n' switch then you directly get the IP of the victim but if the netstat is executed without 'n' switch then you will get the address of the remote system. Something like



C:\netstat

Proto Local Address Foreign Address State

TCP abhisek:1031 msgr.lw4.gs681.hotmail.com:80 ESTABLISHED

Here msgr.lw4.gs681.hotmail.com is the address of the foreign system . putting this address in any IP lookup program and doing a whois lookup will reveal the IP of the remote system.

Note: The port to which your system is connected can be found from this in the same way as I have shown in the case of local address. The difference is that, this is the port of the remote system to which your computer is connected to.

Below I have produced a list of ports and popular services generally found to be running.

21 :: FTP port

80 :: http port

23 :: Telnet port

Note: If your execute the netstat command and find ports like 12345,27374 are open and are in use then make it sure that your sweat heart computer is infected with her boyfriend.. J J J J I mean your computer is infected with some sort of Trojan.

Below I have produced a list of commonly known Trojans and the ports they use by default. So if you find these ports open then get a good virus buster and get these stupid servers of the Trojans kicked out. Well if you want to play with these Trojan by keeping them in your computer but not letting them ruin your system performance then just disble it from the system registry run and they wont be loaded to memory each time when windows starts up[This trick doesn't work for all Trojans].


Netbus :: 12345(TCP)

Subseven :: 27374(TCP)

Girl Friend :: 21554(TCP)

Back Oriface :: 31337 (UDP)



Well guys and gals I hope you are now well familiar with the term IP and what is the utility of IP in cyber world and how to get the IP of a remote system to which you are connected. I hope you find my writings very easy to undertstand. I know I lack the capacity of explaining myself but I try my level best to make things very easy and clear for you all.



How to get the IP of a remote system while chatting through msn messenger ::



This is a tutorial on how to get IP address from MSN messenger. This is actually
a really easy thing to do. It is not like going through the hard time and reversing
MSN messenger like many people think.

The IP address is only given when you accept or are sending a file through MSN
messenger. When you send IM's, the message is sent through the server thus hiding
your victims IP and your. But when you send a file or recieve a file, it is direct
connection between the two computers.

To obtain the IP accept a file transfer or send a file to the victim, when the file
sending is under way from the dos prompt type "netstat" without the quotation marks.
You should get a table like this:

Proto Local Address Foreign Address State
TCP kick:1033 msgr-ns29.msgr.hotmail.com:1863 ESTABLISHED
TCP kick:1040 msgr-sb36.msgr.hotmail.com:1863 ESTABLISHED
TCP kick: ESTABLISHED

The top name in the list is the server's address for IMing. There could be many of
the second name in the list, as a new connection is made to the server for every
room you are IMing to. You are looking for the address of the remote host in
this table it may be something similar to "host63-7-102-226.ppp.cal.vsnl.com" or “203..64.90.6�.
without the quotation marks.
All you need to do now is to put this address in you IP lookup programe and get the IP of the remote system.

So dudes...I hope this is helpful for you...

Posted in: HACKING,NETWORKING